cueSports - shop till ya drop!
  • Presitge  4
  • Presitge 0
  • Presitge 1
  • Presitge 2
  • Presitge 3
  • Presitge 5

PowerGlide Cue

Powerglide Prestige Ii

Handmade in Thailand. This 3/4 split Snooker Cue has a hand-spliced Ebony butt with a single Cocobolo front splice and a natural thick veneer. 3/4 quick release joint. 95mm tip, brass ferrule. Leather buffer. 57", 17oz.  Supplied with a soft cue sleeve and 6" mini extension.

Cue Length  144cm (57")
Shaft Length  109cm (42.9" excluding tip and protruding male joint)
Butt Length  35.6cm (14")
Shaft  Grade A selected Ash - Enhanced Grain
Tip  9.5mm, brass ferrule
Butt  Genuine Ebony
Decoration  Cocobolo
Joint  Brass 'Quick Release'
Butt End Joint  Yes
Weight  17oz, 18oz, 19oz
Powerglide Prestige V

This cue is handmade in Thailand from the best quality wood and materials. It features a hand spliced genuine Ebony butt with 4 thick Maple upper splices, Ebony splices, and 4 Burwood lower splices. It has a 9.5mm tip, brass ferrule, and a quick action joint. Length 57" and available in 17oz, 18oz and 19oz weights. This cue is supplied with soft cue case and 6" mini extension.

Cue Length  57" (144cm)
Shaft Length  104cm (45") excluding the protruding male joint and tip
Butt Length  40.7cm (16")
Shaft  Grade A hand selected Ash with enhanced grain
Tip  9.5mm, brass ferrule
Butt  Hand spliced genuine Ebony 
Decoration  4 thick Maple upper splices, Ebony splices, 4 Burwood lower splices
Joint  Brass 'Quick Action'
Butt End Joint  Yes
Available Weight  17oz, 18oz, 19Oz
Powerglide Swerve 2

Hand-spliced Rosewood butt with 2-point Rosewood front splice with blue and natural veneers. 50/50 split with matched grains at joint. 9.5mm tip and brass ferrule. Length 57”. Made in China

Cue Length  145cm (57")
Shaft Length  72cm (28") not including 2cm for protruding male joint
Butt Length  73cm (28.7)
Shaft  Grade B enhanced Ash
Tip  9.5mm, brass ferrule
Butt  Hand spliced Rosewood
Decoration  Blue and natural veneers
Joint  Brass, Barometric with matched grains at joint
Butt End Joint  -
Weight  18oz
Powerglide Masse 2

Hand-spliced Rosewood butt with 2-point Rosewood front splice with blue and natural veneers. 50/50 split with matched grains at joint. 9.5mm tip and brass ferrule. Length 57”.

Cue Length  145cm (57")
Shaft Length  72cm (28") not including 2cm for protruding male joint
Butt Length  73cm (28.7)
Shaft  Grade B enhanced Ash
Tip  9.5mm, brass ferrule
Butt  Hand spliced Rosewood
Decoration  Blue and natural veneers
Joint  Brass, Barometric with matched grains at joint
Butt End Joint  -
Weight  18oz
Powerglide Purist 2

This cue is handmade in Thailand from the best quality wood and materials. It features a hand spliced genuine Ebony butt. It has a 9.5mm tip, brass ferrule, and a quick action joint. Length 57" and available in 17oz, 18oz and 19oz weights. This cue is supplied with a soft cue case and 6" mini extension.

Cue Length  57" (144cm)
Shaft Length  72.4cm (28.5") excluding the protruding male joint and tip
Butt Length  72.8cm (28.5")
Shaft  Grade A hand-selected Ash with enhanced grain
Tip  9.5mm, brass ferrule
Butt  Hand spliced genuine Ebony 
Decoration  None
Joint  Brass 'Quick Action'
Butt End Joint  Yes
Available Weight  17oz, 18oz, 19Oz
Powerglide Prestige Iv

Handmade in Thailand from top quality wood and materials. Hand-spliced Ebony butt with 4 upper Tulip-wood splices and 4 thin veneers, 1 upper Tulip-wood splice and natural thin veneer. 3/4 quick-release joint. 9.5mm tip, brass ferrule and leather buffer. Length 57" and available in 17oz, 18oz and 19oz weights. Supplied with a soft cue case and 6" mini extension.

Cue Length  144cm (57")
Shaft Length  109cm (42.9" excluding tip and protruding male joint)
Butt Length  35.6cm (14")
Shaft  Grade A selected Ash - Enhanced Grain
Tip  9.5mm, brass ferrule
Butt  Genuine Ebony
Decoration  4 upper Tulipwood Splices, 4 thin natural veneers.
Joint  Brass 'Quick Release'
Butt End Joint  Yes
Weight  17oz, 18oz, 19oz
Powerglide Swerve 34

Hand-spliced Rosewood butt with 2-point Rosewood front splice, blue and natural veneers. 3/4 split with matched grains at joint. 9.5mm tip, brass ferrule and leather buffer. Length 57”.

Cue Length  144cm (57")
Shaft Length  104.4 (41" excluding tip)
Butt Length   40.5cm (16")
Shaft  Ash
Tip  9.5mm, brass ferrule
Butt  Rosewood
Decoration  Rosewood, natural and blue veneers
Joint  Brass
Butt End Joint  Leather Buffer
Weight  Assorted
Powerglide Original 34

A 3/4 split cue, featuring an Ebony butt, Cocolobo Splice and a shaft made from a single piece of the finest straight-grain Ash and matched grain.

This is one of the best selling cues in our range. It is handmade in Thailand from selected Grad A Ash and features a hand-spliced Ebony butt with Cocobolo front splice and 3/4 split with a quick-release joint. 9.5mm tip and a brass ferrule  Length 57” and available in 17oz, 18oz and 19oz weights. Supplied with soft cue case and 6" mini extension.

Cue Length  57" (144cm)
Shaft Length  109cm (42.9") excluding the protruding male joint and tip
Butt Length  35.7cm (14")
Shaft  Grade A hand selected Ash with enhanced grain
Tip  9.5mm, brass ferrule
Butt  Hand spliced genuine Ebony with Cocobolo front splice
Decoration  Cocolobo Splice
Joint  Brass 'Quick Action'
Butt End Joint  Yes
Available Weight  17oz, 18oz, 19Oz
Powerglide Status 2

Hand-spliced 4-point Rosewood butt with a front splice of Rosewood and Maple. 9.5mm tip, brass ferrule and 6" mini butt. Length 57” and available in 17oz, 18oz and 19oz weights.

Cue Length  57" (144cm)
Shaft Length  -
Butt Length  -
Shaft  High grade A hand-selected Ash with enhanced grain
Tip  9.5mm, brass ferrule
Butt  Rosewood 
Decoration  4-point Rosewood butt with a front splice of Rosewood and Maple
Joint  No
Butt End Joint  No
Available Weight  17oz, 18oz, 19Oz
Powerglide Viscount 2

A striking ? Split Cue with a quality Ash Shaft, Hand Spliced Rosewood Butt, Barometric Brass Joint and a 9.5mm Elkmaster Tip. The ferrule is brass and the cue comes with a 6” Mini Extension. It is 57” in length and available in 17oz, 18oz and 19oz

Cue Length  145cm (57")
Shaft Length  108cm (42.5") excluding tip and 2cm for protruding male joint
Butt Length  37cm (14.5")
Shaft  Ash
Tip  9.5mm, brass ferrule
Butt  Rosewood with Rosewood mini extension
Decoration  Natural and red veneers
Joint  Barometric Brass
Butt End Joint  Yes, quick action
Weight  17oz, 18oz, 19oz 
Powerglide Target 2

A 50/50 split Ash shaft with painted Hardwood butt and Hardwood splice with coloured veneers. The cue has a brass joint, a brass ferrule and a 9.5mm tip. Length 57" and available in assorted weights.

Cue Length  57" (144cm)
Shaft Length  72.4cm (28.5") excluding the protruding male joint and tip
Butt Length  71.4cm (28")
Shaft  Ash
Tip  9.5mm, brass ferrule
Butt  Hardwood
Decoration  Natural and yellow front splices
Joint  Brass 
Butt End Joint  No
Available Weight  Assorted
Powerglide Connoisseur 2

Handmade in Thailand from the best quality wood and materials. It has a distinctive 12 point butt design with Ebony, Maple & Rosewood inlay splices with a quick-release joint. It has a 9.5mm tip and brass ferrule. Length 57" and available in 17oz, 18oz and 19oz weights. Supplied with soft cue sleeve.

Cue Length  57" (144cm)
Shaft Length  72.4cm (28.5") excluding the protruding male joint and tip
Butt Length  72.8cm (28.5")
Shaft  Grade A hand-selected Ash with enhanced grain
Tip  9.5mm, brass ferrule
Butt  12 point design with genuine Ebony, Maple & Rosewood inlay splices
Decoration  Ebony, Maple and Rosewood
Joint  Brass 'Quick Action'
Butt End Joint  Yes
Powerglide Original 2

A 50/50 split cue, featuring an Ebony butt, Cocolobo Splice and a shaft made from a single piece of the finest straight-grain Ash and matched grain.

This cue is from our Heritage range and is made from the finest materials. Hand-made in Thailand it has Hand-spliced Ebony butt with Cocobolo front splice, a 50/50 split with quick-release joint and matching grains at joint. 9.5mm tip, brass ferrule. Length 57” and available in 17oz, 18oz and 19oz weights. Supplied with soft cue case.

Cue Length  145cm (57")
Shaft Length  72cm (28") excluding tip and 2cm for protruding male joint
Butt Length  72.7cm (28.6") 
Shaft  Grade A hand selected Ash with enhanced grain
Tip  9.5mm, brass ferrule
Butt  Hand spliced genuine Ebony with Cocobolo front splice
Decoration  Cocolobo Splice
Joint  Brass, 'Quick Action'
Butt End Joint  Yes
Weight  17oz, 18oz, 19oz 
Powerglide Diplomat 34

A 3/4 split Snooker Cue with a hand-spliced 4-point Rosewood and Maple butt. 3/4 split with a unique Bakelite & brass joint. 9.5mm tip, brass ferrule and leather buffer. Length 57” and available in 17oz, 18oz and 19oz weights. Also includes a 6" ebonised mini butt extension.

Cue Length  57" (144cm)
Shaft Length  107.1cm (42") excluding the protruding male joint and tip
Butt Length  37.3cm (14.6")
Shaft  Top grade hand selected Ash with enhanced grain
Tip  9.5mm, brass ferrule
Butt  Rosewood
Decoration  Hand spliced Rosewood and Maple 4 point splice
Joint  Brass Bakelite joint
Butt End Joint  Yes
Available Weight  17oz, 18oz, 19Oz
Powerglide Vinci 2

A 50/50 split snooker cue with an Ash shaft a Birds Eye Maple front splice set against contrasting 4 point red veneers. It has an Ebony butt and hand spliced Maple splices. The cue has enhanced grain with the grain matched at the joint. A quick-release brass joint, 9.5mm Elkmaster tip and is 57" long. This cue is supplied with a soft cue sleeve.

Cue Length  57" (144cm)
Shaft Length  104cm (28.5") excluding the protruding male joint and tip
Butt Length  72.7cm (28.7")
Shaft  Grade A hand-selected Ash with enhanced grain
Tip  9.5mm, brass ferrule
Butt  Hand spliced genuine Ebony 
Decoration  Ebony splices with Maple and red veneers
Joint  Brass 'Quick Action'
Butt End Joint  No
Available Weight  17oz, 18oz, 19Oz
Powerglide Prestige Iii

Handmade in Thailand from top quality wood and materials. Hand-spliced Ebony butt with single front Snakewood splice and 3 thin veneers. 3/4 quick-release joint. 9.5mm tip, brass ferrule. Length 57" and available in 17oz, 18oz and 19oz weights. Supplied with soft cue sleeve and 6" mini extension.

Cue Length  144cm (57")
Shaft Length  109cm (42.9" excluding tip and protruding male joint)
Butt Length  35.6cm (14")
Shaft  Grade A selected Ash - Enhanced Grain
Tip  9.5mm, brass ferrule
Butt  Genuine Ebony
Decoration  Snakewood Splice and 3 veneers
Joint  Brass 'Quick Release'
Butt End Joint  Yes
Weight  17oz, 18oz, 19oz
Powerglide Connoisseur 34

Handmade in Thailand from the best quality wood and materials. It has a distinctive 12 point butt design with Ebony, Maple & Rosewood inlay splices with a quick-release joint. It has a 9.5mm tip and brass ferrule. Length 57" and available in 17oz, 18oz and 19oz weights. Supplied with soft cue sleeve.

Cue Length  57" (144cm)
Shaft Length  104cm (45") excluding the protruding male joint and tip
Butt Length  40.7cm (16")
Shaft  Grade A hand-selected Ash with enhanced grain
Tip  9.5mm, brass ferrule
Butt  12 point design with genuine Ebony, Maple & Rosewood inlay splices
Decoration  Ebony, Maple and Rosewood
Joint  Brass 'Quick Action'
Butt End Joint  Yes
Extension Supplied 6 inch Extension
Available Weight  17oz, 18oz, 19Oz
Powerglide Prestige I

Handmade in Thailand from top quality wood and materials. Plain hand-finished butterfly spliced black ebony butt. 3/4 split with a quick-release joint. 9.5mm tip and brass ferrule. Length 57" and available in 17oz, 18oz and 19oz weights. Supplied with a soft cue sleeve and 6" mini extension.

Cue Length  144cm (57")
Shaft Length  109cm (42.9" excluding tip and protruding male joint)
Butt Length  35.6cm (14")
Shaft  Grade A selected Ash - Enhanced Grain
Tip  9.5mm, brass ferrule
Butt  Genuine Ebony
Decoration  Plain
Joint  Brass 'Quick Release'
Butt End Joint  Yes
Weight  17oz, 18oz, 19oz